- وصف
- سؤال
وصف
مقدمة:
To determine the melt mass-flow MFR (ز/10 دقائق), the melt volume-flow rate MFV(سم3/10دقيقة)and the melt density of thermo resin, for the engineering plastics of polycarbonate, nylon and fluorine plastics, الخ, whose melt temperature are higher, but also fit for the plastics tests of polyethylene, البوليسترين, البولي بروبيلين, ABS resin and poly-formaldehyde resin, الخ, whose melt temperature are lower, it is widely applied to the fields of plastics materials, product, البتروكيماويات
المعايير:
غيغابايت 3682, ايزو 1133, أستم د 1238, من 53735, UNI-5640, JJB878, and made according to JB/T5465 (Technical Standard of Melting Flow Rate Instrument).
Tests performed:
adopts PID temperature control, العرض الرقمي, it can cut material automatically, has two measuring method, MFR and MVR, print out the test report
Main technical parameter:
نطاق القياس: 0. 01-600.00 ز/10 دقائق (MFR)
0. 01-600.00 cm/10min(MVR)
0.001-9.999 g/cm (melt density)
نطاق درجة الحرارة: 50-400درجة مئوية
Temperature precision: ±0.5°C resolution: 0.1درجة مئوية
Material canister inside diameter 9.55±0.025mm length: 160مم
قطر المكبس 9.457 ± 0.01mm الكتلة: 106ز
Mould inside diameter 2.095mm length: 8± 0.025mm
حمولة: full load
Base weight: 0.325كجم.
Weights: 0.875كجم, 1.290كجم, 1.835كجم, 3.475كجم, 4.675كجم, 5.000كجم, 5.000Kg one each (may freewill combination )
دقة: 0.5%
Cleaning accessories: clear material pole
Calibration accessories: water level bubble
Measuring method: MFR MVR/ DENSITY
طاقة التوريد: 220V±10% 50Hz Heat up power: about 550W
حجم الخطوط العريضة: (length*width*height ) 600*400*500 (unit: مم)
وزن صافي: 85Kg Gross weight: 135كجم
