ISO 20482 Mga materyales na metal – Sheet Erichsen cupping test machine
Metallic materials — Sheet and strip — Erichsen cupping test Machine
Saklaw
This International Standard specifies a standard test method for determining the ability of metallic
sheets and strips having a thickness from 0,1 mm up to 2 mm and a width of 90 mm or greater to
undergo plastic deformation in stretch forming.
For materials that are thicker and when only narrower strips are available, tools of specified dimensions
are provided.
Through crack
crack that goes through the full thickness of the test piece and is just sufficiently wide to allow light to pass through part of its length
- Paglalarawan
- Pagtatanong
Paglalarawan
ISO 20482 Mga materyales na metal – Sheet Erichsen cupping test machine
ISO 20482 Sheet Metal Erichsen Cupping Testing Machines
Sheet Metal Erichsen Cupping Testing Machine/tester ISO 20482
GBW-60B Computer Control Erichsen Cupping Testing Machine
1. Paglalapat & Mga Tampok:
Ang cupping testing machine is used to test extend and stretch capacity of metal thin plate and band. It is the only instrument to test the metal’s plastic deformation. Also it can be used to test non-ferrous metal’s anisotropic character if adding impact cup mould. The machine adopts high precision raster measure instrument to test Erichsen value so it has a high testing precision. It adopts the electric control machinery onload and LCD spoke sensor so it raised the testing precision of the main test force and accuracy of controlling sample breaking.
2. Standards:
ISO20482: 2003 Metallic materials-Sheet and strip-Erichsen Cupping Test, GB/T4156-2007 Metallic materials-Sheet and strip-Erichsen Cupping Test
3. Pangunahing Teknikal na Mga Pagtutukoy:
Thickness of holding sample:0.05~2mm (with high precision sensor, it can achieve ultrathin plate test.
(Special order: non-standard cup:0.05~3mm; non-ferrous metal plate:0.1~2mm)
Max capicity: 60kN
Range of testing force: 0.2kN~60kN
Test katumpakan: error less than ±1％
Test speed: 2~100mm/min (at any speed, it can keep constant speed control)
Distance of punch pin running: 40mm
Distance of holding pistons running: 40mm
Max load of punching: 60kN
Max load of holding: 10kN
Resolution of Erichsen value: 0.01mm
Hydraulic oil: N46 hydraulic oil
Display: Computer control
Special order: ① non-standard cupping puncher ball diameter:φ3±0.02、φ8±0.02、φ15±0.05mm and full set moulds; ②standard punching cup nonferrous metal plate:0.1～2mm and non-standard punching cup nonferrous metal plate 0.1～3mm and full set moulds;③cupping testing machine according with American and Europe standard.
It also can customized make FLC Test, atbp.
ISO 20482 Mga materyales na metal – Sheet Erichsen cupping test machine/tester
Para sa mas detalyadong info, Mangyaring huwag mag atubiling makipag ugnay sa amin sa pamamagitan ng email: andy@victorytest.com
Mobile & Whatsapp No.: +86-15305307234
