ISO 3506 Fastener Bolts screws at studs Tensile Testing Machine
ISO 3506 Fastener Bolts screws and studs Tensile Testing Machine It’s computer controlled servo hydraulic type, Ang piston ay napupunta up at mataas na katumpakan load cell direktang pagsukat ng pagsubok na puwersa, encoder pagsukat ng displacement at electric extensometer pagsukat ng specimen's extension. Ang makina ay calibrated ayon sa ISO 75001 at ASTM E4.
- Paglalarawan
- Pagtatanong
Paglalarawan
ISO 3506 Fastener Bolts screws at studs Tensile Testing Machine
Steel Nuts Bolts Pagsubok ng Machine
(DIN EN ISO 898-1, ASTM F606-1, DIN EN ISO 3506-1)
Panimula
Ang WAW se na itomga rry Fastener Bolts screws at studs Tensile Testing Machine ay malawakang ginagamit para sa makunat pagsubok para sa fastener bolt nut screw.
Ito ay nagpapatibay 4 mga haligi na may chrome plated at 2 nangungunang mga tornilyo, mataas na tigas, mas matatag.Pindutin ang pindutan na pinatatakbo haydroliko makunat grips, madaling mapatakbo.
Bolts screws and studs Tensile Testing Machine Ito ay kinokontrol ng computer servo hydraulic type, Ang piston ay napupunta up at mataas na katumpakan load cell direktang pagsukat ng pagsubok na puwersa, encoder pagsukat ng displacement at electric extensometer pagsukat ng specimen's extension. Ang makina ay calibrated ayon sa ISO 75001 at ASTM E4.
Maaari itong umayon sa pamantayan ng pagsubok tulad ng ASTM A193 DIN EN ISO 898-1, ASTM F606-1, ASTM A370, ASTM A 325, ASTM A 490, DIN EN ISO 3506-1 atbp.
ISO 3506 Fastener Bolts screws at studs Tensile Testing Machine
How to test the tensile strength of fasteners?
The tensile strength or ultimate tensile strength of a fastener is the force at which the fastener breaks. To test tensile strength, we use a wedge tensile test where a wedge is placed under the head of the fastener and force is applied until the fastener breaks.
What is ASTM Fastener Tensile Testing?
ISO 898-1 | ISO 3506-1: Threaded fastener testing…
Standards ISO 898-1, ISO 3506-1 or ASTM F606 cover details of tensile testing of threaded fasteners. For example, the test speed must not exceed 25 mm / min. Additionally, when determining yield strength or offset yield strength, the maximum test speed is 10 mm / min.
What is the strength of the bolt?
Bolt grade
Common grades (grades) in the metric system are 5.8, 8.8, 10.9, and 12.9. Each grade has a specific bolt strength. Regardless of which system is used, higher numbers mean stronger bolts. For most home and automotive applications, you only need bolt strength grade 8 or metric grade 10.9 and up.
Pangunahing teknikal na mga parameter
| Modelo ng Parameter | WAW-300E | WAW-600E | WAW-1000E | WAW-2000E |
| Max. pagsubok na puwersa (kN) | 300 | 600 | 1000 | 2000 |
| Katumpakan | ±0.5% ng halaga ng pagbabasa | |||
| Round specimen diameter na hanay (mm) | φ10-φ32 | φ10-φ40 | φ13-φ60 | Φ15-φ70 |
| Flat specimen kapal ng hanay (mm) | 0-25 | 0-30 | 0-40 | 10-70 |
| Flat ispesimen lapad hanay (mm) | 75 | 90 | 100 | 120 |
| Makunat na espasyo (mm) | 600 | 740 | 800 | 950 |
| Puwang ng compression (mm) | 530 | 650 | 670 | 750 |
| Clearance sa pagitan ng mga haligi (mm) | 465 | 485 | 515 | 700 |
| Upper at lower compress plate na sukat (mm) | φ120 | φ160 | 200×200 | φ240 |
| Distansya ng baluktot sa pamamagitan ng pass roll (mm) | 30-400 | 30-430 | 30-380 | 50-430 |
| Max. Piston stroke (mm) | 200 | 200 | 250 | 250 |
| Suplay ng kuryente | 380V±10%, 50Hz, tatlong bahagi | |||
| Kapaligiran sa trabaho | 10-40°C, Relatibong kahalumigmigan≤80% | |||
| Dimensyon ng host machine (mm) | 740×620×2058 | 790×690×2330 | 880×760×2660 | 1120×850×3270 |
| Dimensyon ng control cabinet (mm) | 1150×870×650 | |||
| Timbang (kg) | 1800 | 2500 | 3500 | 5000 |
ISO 3506 Fastener Bolts screws at studs Tensile Testing Machine / Steel Nuts Bolts Testing Machine
Para sa karagdagang detalye, Mangyaring huwag mag atubiling makipag ugnay sa amin:
E-mail: andy@victorytest.com
Whatsapp: +86-15305307234
