





ISO 7802:1983 Wire wrapping testing machine
Ang Wire Wrap Testing Machine ay ginagamit upang gawin ang wrapping test ng 0.1mm – 10mm steel wire, galvanized steel wire, tanso at tanso haluang metal na linya ng contact, aluminyo wire, mataas na lakas na kawad, atbp. Maaari rin itong magamit para sa pagsubok ng pagdirikit ng pagsubok ng galvanized coating. Sa pamantayan, umaayon ito sa ISO7802: 2013: Materyal na metal- Wire-Wrapping Test.
- Paglalarawan
- Pagtatanong
Paglalarawan
NDS-18 Metal Wire Wrapping Testing Machine
Metal Wire Wrapping Testing Machine
(diameter ng wire Ф1.0- F10mm)

Pangunahing pag-andar
Metal Wire Wrapping Testing Machine is used to do wrapping test of 0.1mm – 18mm steel wire, galvanized steel wire, tanso at tanso haluang metal na linya ng contact, aluminyo wire, mataas na lakas na kawad, atbp. Maaari rin itong magamit para sa pagsubok ng pagdirikit ng pagsubok ng galvanized coating. Sa pamantayan, umaayon ito sa ISO7802: 2013: Materyal na metal- Wire-Wrapping Test. Ang pagsubok ay binubuo ng pag-ikot ng wire sa isang tinukoy na bilang ng mga pagliko sa paligid ng isang mandrel na may diameter na tinukoy sa nauugnay na pamantayan upang bumuo ng isang malapit na nakabalot na helix. Maaari rin itong magsama ng isang tinukoy na pagkakasunud-sunod ng mga windings at un-windings, o kahit re-windings. Nagbibigay ito ng maaasahang paraan ng pagsukat para sa mga tagagawa at gumagamit ng wire.
International Standard:
ISO (ang International Organization para sa Standardisasyon) is a worldwide federation of national standards bodies (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council.
International Standard ISO 7802 was developed by Technical Committee ISO/TC 164, Mechanical testing of metals, and was circulated to the member bodies in September 1982.
It has been approved by the member bodies of the following countries :
Australia France Poland
Austria Germany, F. R. South Africa, Rep. ng
Brazil Hungary Spain
Bulgaria Ireland Sweden
Canada Italy Thailand
China Japan USA
Czechoslovakia Netherlands USSR
Egypt, Arab Rep. of Norway
The member body of the following country expressed disapproval of the document on technical grounds :
Mga teknikal na pagtutukoy
| Hindi. | Mga Item | Spec. |
| 1 | Wire diameter | F1.0- Ф18mm |
| 2 | Pagsusulit sa pagbabalot | 30r / min |
| 3 | Axial loading weights | hindi hihigit 5% ng nominal na tensile strength ng wire sa panahon ng winding |
| 4 | Mga Mandrel | 6 – 20mm |
| 5 | Pagbibilang ng resolusyon | 360°/r |
| 6 | Gumaganang boltahe | 220VAC /50Hz |
| 7 | Dimensyon (L*W*H) | 1200x560x1250mm |
Para sa karagdagang impormasyon, mangyaring makipag ugnay sa amin sa pamamagitan ng Mag-email: andy@victorytest.com
Whatsapp & Mobile: +86-15305307234






