Plastic Film Puncture Test PH 14477, ASTM F1306
- The static puncture test to EN 14477 measures this behavior using a pointed tip with a diameter of 0.8 mm. This test is also known as the Parker Ball-Point Test.
- ASTM F1306 describes a method with very similar objectives for measurement of flexible barrier films and laminates. It uses an indenter with a tip radius of 1.6 mm and a conical shaft with a 6° angle. The test is performed on a film strip, which is fastened over an opening with a 35 mm diameter.
- Paglalarawan
- Pagtatanong
Paglalarawan
Plastic Film Puncture Test PH 14477, ASTM F1306
1. Panimula:
This computer controlled one column table-top type electromechanical tensile testing machine is used to do puncture strength test of stretch wrap film. It also can perform tensile test of non-metal materials with small tensile strength. By means of relative testing accessories, it also can do compression, pagbaluktot, peeling and tearing, etc test. It meet with the requirements of GB, ISO, JIS, DIN and ASTM, atbp. They are essential testing instrument for quality testing section, university and colleges, research institution and industrial and mining enterprise. Sa testing standard, it conforms to ASTM D5748.
2. Pangunahing Teknikal na Mga Parameter:
| Modelo Specification | WDW-05 |
| Force Range (N) | 10- 500 |
| Force Accuracy | ±0.5% of applied force |
| Position Resolution (mm) | 0.01 |
| Test Speed Range | 0.01mm/min~500mm/min, servo control |
| Crosshead Travel (mm) | 600 |
| Power Requirement | 1 Phase, 220V±10%, 50Hz |
| Environmental Requirements | Room temperature~40℃, relative humidity<80% |
| Frame Dimension (mm) | 600×315×1450 |
| Frame Weight (kg) | 150 |
Para sa mas detalyadong info, mangyaring makipag ugnay sa amin sa pamamagitan ng email: andy@victorytest.com
WhatsApp: +86- 15305307234
