Paglalarawan

REBAR MAKUNAT PAGSUBOK MACHINE 600KN 1000KN 2000KN

Describe:

Rebar, Steel Bar, Reinforced Concrete Bar Tensile Testing Machine is used for tensile strength test, elongation test, yield strength test, elongation rate of percentage at break, atbp.

It has 100kN to 2000kN load capacity. It can test rebar with diameter from 8mm to 50mm./Rebar Tensile And Bending Testing Machine

Pamantayan:

REBAR TENSILE TESTING MACHINE 600KN 1000KN 2000KN/Rebar Tensile And Bending Testing Machine

There are several global standards that specify mechanical properties and/or testing requirements for steel reinforcing bar (rebar). Some of the most common include ASTM A370, ISO 15630-1, BS 4449, AS/NZS 4671, JIS G 3112, GB 1499, and ACI 318. These standards include testing requirement that are specific to determining rebar tensile and bend properties. Many of these rebar standards also make reference to the widely recognized metals tensile testing standards, such as ASTM E8, ISO 6892-1, EN 10002-1, AS 1391, JIS Z 2241, GB/T 228.1 for general tensile testing guidance.

Main specifications:

2.1 Max. Puwersa ng pagsubok: 600kN, 1000 kN, 2000kN

2.2. Saklaw ng pagsukat ng katumpakan: 2%-100%;

2.3 Katumpakan ng pagsubok ng puwersa: ±0.5% ng halaga ng pagbabasa

2.4. Saklaw ng kontrol ng rate ng stress: 1-60MPa / S;

2.5. Ayusin ang hanay ng mga pagsubok stress rate: 1N / mm²S^-1-60N / mm²S^-1;

2.6. Ayusin ang hanay ng mga rate ng pagsubok strain:0.00025/S-0.0025/S;

2.7. Katumpakan ng pagsukat ng pagpapapangit: ±0.5%;

2.8. Katumpakan ng pagsukat ng displacement: ±1%;

2.9. Saklaw ng kontrol ng rate ng paglipat: 0.5mm/min-50mm/min;

2.10. Makunat na espasyo: 850mm;

2.11. Puwang ng compression: 750mm;

2.12. Clamping diameter ng rebar: φ13-φ40mm;

2.13. Clamping width of flat specimen: 120mm;

2.14. Clamping kapal ng flat specimen: 0-40mm;

2.15. Diameter ng itaas at mas mababang plate: 210×210mm;

2.16. Piston stroke: 250mm;

2.17. Span of bending roller: 50-450mm; width of roller: 140mm; diameter of roller: φ40mm

2.18. Pagsukat ng pagpapapangit: haba ng gauge ng extensometer: 100mm; Extension: 25mm;

2.19. Suplay ng kuryente: 3-Phase 4-wire, 380V, 50 Hz or specified by users

2.20. Dimension: Host machine 1010×815×2500(mm) Power pack: 1100×640×1000(mm)

2.21. Timbang: Host machine 3500kg, Power pack: 200kg.

REBAR MAKUNAT PAGSUBOK MACHINE 600KN 1000KN 2000KN

Para sa mas detalyadong info, Mangyaring huwag mag atubiling makipag ugnay sa amin.

Mag-email: andy@victorytest.com

Makipag ugnay sa tao: Andy Li

Mobile: +86-15305307234