ISO 15630-3:2010 Mesin Uji Tarik untaian baja

ISO 15630-3:2010 Mesin Uji Tarik untaian baja

Standar：ISO 75001 dan ASTM E4. Dalam pengujian standar, itu sesuai dengan ISO6934, ISO6892, dll standar pengujian internasional.

Keterangan
Pertanyaan

Keterangan

ISO 15630-3:2010 Steel for reinforcement and prestressing of concrete- Test methods Part 3: Prestressing steel

WAW-S Series Computerized PC Strand Tensile Testing Machine

ISO 15630-3:2010 Mesin Uji Tarik untaian baja

(600buku, 1000kN Capacity, 6 kolom, 0.5 akurasi kelas)

1. Perkenalan

This WAW-S series computer control servo hydraulic universal testing machine is designed for tensile strength test Rm, mengukur ekstensi non-proporsional Rp0,2, dll dari untai PC (untaian baja pratekan).

It uses high precision load cell to measure testing force, high precision encoder to measure displacement and extensometer to measure deformation of PC strand.

It adopts professional hydraulic operated tensile grip, easy and quickly grip the sample. The successful testing ratio can reach to 100%, the sample is broken at the middle position. Not only it improves the successful testing ratio, it also saves time and testing cost. Ini adalah mesin pengujian yang ideal untuk produsen PC strand, biro pemeriksaan mutu, perguruan tinggi dan universitas, dll..

Mesin dikalibrasi sesuai ISO 75001 dan ASTM E4. Dalam pengujian standar, itu sesuai dengan ISO6934, ISO6892, dll standar pengujian internasional.

2. Parameter teknis utama

Model Parameter	WAW-600S	WAW-1000S
Maks. kekuatan pengujian (buku)	600	1000
Accuracy of testing force measuring	±0,5% dari nilai bacaan
Rentang pengukuran beban	1%-100% FS
Accuracy of deformation measuring	±0,5% FS
PC Strand clamping range	Φ15.2mm, diameter lain adalah opsional
Ruang tarik	1100mm
Ekstensometer Listrik	Gauge length 500mm, maks. perpanjangan:15mm
Maks. langkah piston	250mm
Catu daya	3-fase, 380V±10%, 50Hz
Dimensi mesin host	790×690×2890mm	880×760×3160mm
Dimensi kabinet kontrol	1150×560×870mm	1150×560×870mm
Berat	3000kg	3500kg

3. Professional tensile jaw:

Four pieces of tensile jaws are inserted into the tensile grip seat, then it adopts hydraulic operated the clamping and loosen of PC stand. The good quality tensile jaws are endurable, umur panjang. It can tighten holding the sample without any loosen or slippage during the test. The well adjusted clamping force can not make the sample broken at the ends of clamping, it would break at the middle position of the smple.