Mesin Pengisar dan Penggilap Sampel Automatik YMPZ-1

Penerangan

pengenalan:

Dalam proses penyediaan sampel metalografik, pra pengisaran, menggilap dan mengisar adalah prosedur yang sangat diperlukan. This machine YMPZ-1 is produced with PPC sewage collection plate and cover. Mesin ini dikawal oleh mikrokomputer cip tunggal. Motor adalah motor tanpa berus DC dan tidak perlu menggantikan berus, digunakan untuk masa yang lama. The machine is non-toxic painted. Strong large support chassis design ensures the precision rotary balance. Spindle leak-proof design ensures the bearing almost without damage and the super mute design brings a good experience. It supports for fast disk system, with the use of elasticity, and can be used with automatic grinding device. It can replace the manual grinding and polishing of the procedure, timing and set the speed of grinding head. The platen speed of polishing disc operates independently. It is the best equipment of metallographic sample preparation.

Parameter utama:

Grinding Method: Automatic Grinding Wheel Diameter: 230 mm

Kelajuan: 100-1400 r/min, Stepless Power: 400W Test Block: 4

Air Pressure: 2.3~8kg/cm²

Grinding Head Speed: 20-120 r/min, Stepless Way of Pressure: separate pressurized

Saiz sampel: Maks. Φ45mm (Selectable, φ22, φ30, φ45 etc.)

Interface: membrane switch, paparan digital, set the grinding speed, timing, steering and tank cleaning function

Paparan: 1. Kelajuan 2. Time countdown 3. Air pressure

Pressurizing Force Adjustable Range: 0-6 kg

Grinding Time: adjustable range 0-100 minit (It can display the remaining time when grinding)

Rotation Angle of Grinding Head: boleh laras

Grinding Direction: forward or reverse direction

Specimen Chuck: specimen fixture can be quickly replaced (quickly-disassembled function)

Dimensi: 420L×623W×645Hmm

Bekalan Kuasa: AC220V, 1000W Weight: 50Kg