ANSI/AWWA C909 Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe Hydrostatic Testing Machines (hydrotesters)

AWWA C909 Molecularly Oriented Polyvinyl Chloride PVCO Pressure Pipe Hydrostatic Testing Machines (hydrotesters)

AWWA C909 Molecularly Oriented Polyvinyl Chloride PVCO Pressure Pipe Hydrostatic Testing Machines (hydrotesters) ANSI/AWWA C909 (PVCO) Pressure Pipe Hydrostatic Tester (hydrotesters) Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In.(100 mm) and Larger Introduce VICTORY TEST Solution (VTS) offers hydrostatic testing machines (hydrotesters). With many years of experience building hydrotesters, our machines are proven to consistently meet all aspects of the specification proof test so that you can rest assured that your pipe meets or exceeds required expectations. Our hydrostatic testing machines (hydrotesters) are...

2024-03-05Read more...
ISO 7801 Metallic Materials Wire — Reverse Bend Test

ISO 7801 Metallic Materials Wire — Reverse Bend Test

ISO 7801 Metallic Materials Wire — Reverse Bend Test ISO 7801 Metal Wire Repeated Bending Testing Machine JWJ-10 Metal Wire Repeated Bending Tester   Introduction: This Metal Wire Repeated Bending Testing Machine/Tester is mainly used for metal wire repeated bending test, in the purpose of observing the plastic deformation performance and it's defects during test. Work principle: Clamp the wire into the grip, press start button, the wire will be bended left and right in 90 degree. After specimen broken, auto stop and record...

2023-12-12Read more...
BS ISO 9649 Metallic Materials Wire Reverse Torsion Test Machine

BS ISO 9649 Metallic Materials Wire Reverse Torsion Test Machine

BS ISO 9649 Metallic Materials Wire Reverse Torsion Test Machine BS ISO 9649 Metallic Materials Wire Reverse Torsion Test Scope This International Standard specifies a method for determining the ability of metallic wire of diameter dimension from 0,3 mm to 10,0 mm inclusive to undergo plastic deformation during reverse torsion. This test is used to detect surface defects, as well as to assess ductility. 1   Principle A test piece of wire is twisted a specified number of turns through 360° around its own...

2023-10-27Read more...
ISO 7802 Metallic Materials - Wire - Wrapping test machine

ISO 7802 Metallic Materials – Wire – Wrapping test machine

ISO 7802 Metallic materials - Wire - Wrapping test Metallic materials - Wire - Wrapping test machine ISO 7802 Metallic Materials - Wire - Wrapping test machine     1. Scope This International Standard specifies a method for determining the ability of metallic wire of diameteror thickness 0,1 mm to 10 mm inclusive, to undergo plastic deformation during wrapping. 2. Principle The wrapping test consists of winding a wire to a specified number of turns around a mandrel of thediameter specified in the relevant standard to...

2023-10-26Read more...
IEC 61395 Creep Testing Machine for Stranded Conductors

IEC 61395 Overhead Electrical Conductors- Creep Test Procedures

IEC 61395-1998 Overhead Electrical Conductors- Creep Test Procedures for Stranded Conductors Overhead Electrical Conductors- Creep Test Machine  Overhead Electrical Conductors- Creep Test Machine for Stranded Conductors 1) The IEC 61395 Overhead Electrical Conductors- Creep Test Procedures is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of      the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities,...

2023-10-26Read more...
Application of ASTM D412 high and low temperature tensile testing machine in elastomer tensile testing

Application of ASTM D412 high and low temperature tensile testing machine in elastomer tensile testing

Application of ASTM D412 high and low temperature tensile testing machine in elastomer tensile testing Application of high and low temperature tensile testing machine in elastomer tensile testing under ASTM D412 standard   How to perform elastomer tensile testing? Reference standard ASTM D412 Performance evaluation of vulcanized (thermoset) rubbers and thermoplastic elastomers is critical in the manufacture of consumer products and highly specialized materials. From tires to O-rings on spacecraft, these materials play an important role in various fields. In this article, we...

2023-10-08Read more...
ISO 13477 RCP Tester (S4 Test)

Rapid crack propagation ISO 13477 on HDPE pipes RCP Tester

Rapid crack propagation ISO 13477 on HDPE pipes RCP tester Rapid Crack Propagation Tester (RCP) RCP is used to determine the critical pressure or critical temperature for rapid crack propagation. ISO 13477 Thermoplastics pipes for the conveyance of fluids- Determination of resistance to rapid crack propagation (RCP) —Small-scale steady-state test (S4 test) RCP Test Unit  Characteristics          Rapid crack propagation ISO 13477 on HDPE pipes RCP ester Rational structure and accurate impact speed. There is energy storage device in basic unit, which...

2023-09-01Read more...
VTS Horizontal Tensile Test Bed

How to choose Horizontal Tensile Test Bed?

How to choose Horizontal Tensile Test Bed? VTS Horizontal Tensile Test Bed Manufacturer/Wholesaler/Factory (Capacity: it starts from 30Ton to 3000Ton, etc.) The is used for tensile strength test of lifting gears, rigging, etc material, like steel wire rope, chain, webbing sling, spreader beam, shackles, hooks, fiber ropes, etc.   Unique design: More than 20 years experience senior engineer in designing various load capacity of Horizontal Tensile Test Bed to meet different customer’s requirement.   Higher stiffness load frame: Each load capacity of our Horizontal Tensile Test Bed is strongly...

2010-01-10Read more...